Ir para o conteúdo principal

RIDGID R860052 Motor Replacement

O que você precisa

  1. RIDGID R860052 Motor Replacement, Motor: passo 1, imagem 1 %32 RIDGID R860052 Motor Replacement, Motor: passo 1, imagem 2 %32
    • Remove the battery from the drill before you begin.

    • Use a T10 Torx screwdriver to remove the ten screws on the information label side of the drill.

    • These ten screws are 19 mm long.

  2. RIDGID R860052 Motor Replacement: passo 2, imagem 1 %32
    • Lift off and remove the cover with the informational label.

  3. RIDGID R860052 Motor Replacement: passo 3, imagem 1 %32 RIDGID R860052 Motor Replacement: passo 3, imagem 2 %32 RIDGID R860052 Motor Replacement: passo 3, imagem 3 %32
    • Remove the switch assembly, chuck, and motor from all drill covers.

  4. RIDGID R860052 Motor Replacement: passo 4, imagem 1 %32 RIDGID R860052 Motor Replacement: passo 4, imagem 2 %32
    • Twist the chuck and motor in the opposite direction and gently pull them apart.

  5. RIDGID R860052 Motor Replacement: passo 5, imagem 1 %32 RIDGID R860052 Motor Replacement: passo 5, imagem 2 %32 RIDGID R860052 Motor Replacement: passo 5, imagem 3 %32
    • Desolder the black and red wires from the motor.

    • Replace motor and resolder the black and red wires back onto the motor.

    • Be aware of the heat level of the metal part on the soldering tool.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Equipe

UC Davis, Team S18-G4, Lore Winter 2019 Membro de UC Davis, Team S18-G4, Lore Winter 2019

UCD-LORE-W19S18G4

Membros da 3

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Duração total: 475