Skip to main content

Introdução

If your drill continues to turn in an opposite direction you desire or does not turn at all, this guide will provide you guidance to the process of replacing the dysfunctional direction of rotation selector in a RIDGID R860052.

Peças

Nenhum componente especificado.

  1. Remove the battery from the drill before you begin. Use a T10 Torx screwdriver to remove the ten screws on the information label side of the drill.
    • Remove the battery from the drill before you begin.

    • Use a T10 Torx screwdriver to remove the ten screws on the information label side of the drill.

    • These ten screws are 19 mm long.

  2. Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora

    Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora
  3. Lift off and remove the cover with the informational label.
    • Lift off and remove the cover with the informational label.

  4. Lift up the switch assembly. Unhook the rotation selector from the drill cover and replace with a new one. Unhook the rotation selector from the drill cover and replace with a new one.
    • Lift up the switch assembly.

    • Unhook the rotation selector from the drill cover and replace with a new one.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Anna Wu

Membro desde: 04-02-2019

261 Reputation

2 Guias de autoria

Team

UC Davis, Team S18-G4, Lore Winter 2019 Membro de UC Davis, Team S18-G4, Lore Winter 2019

UCD-LORE-W19S18G4

3 Membros

3 Guias de autoria

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 74