Introdução

This guide may be of use if the sound no longer works properly. For speaker accessibility, the battery will have to be removed.

  1. Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.
    • Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.

    Adicionar comentário

  2. Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.
    • Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.

    Adicionar comentário

    • Remove cover completely.

    Adicionar comentário

    • Disconnect battery cable from the motherboard.

    Adicionar comentário

    • Pull the thin black keyboard connector off and set it aside.

    Adicionar comentário

    • Disconnect the thick black band (bus) using a plastic opening tool or fingernail.

    Adicionar comentário

    • Use nylon spudger tool or plastic card to separate battery from the case.

    Adicionar comentário

    • Carefully peel off the battery.

    Adicionar comentário

    • Disconnect the speaker cord from the motherboard.

    Adicionar comentário

    • Use the plastic spudger to slide the speaker out.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Akitaka Hashimoto

Member since: 27-03-2018

311 reputação

2 Guides authored

Equipe

IUPUI, Team S3-G2, Harley Spring 2018 Membro de IUPUI, Team S3-G2, Harley Spring 2018

IUPUI-HARLEY-S18S3G2

3 Membros

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 76