Conserte seus objetos Comunidade Loja

RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement

O que você precisa

  1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: passo 1, imagem 1 %32 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: passo 1, imagem 2 %32 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: passo 1, imagem 3 %32

    • Remove the three Phillips #00 screws at the bottom of the device.

    Editar

  2. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 2, imagem 1 %32 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 2, imagem 2 %32

    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

    Editar

  3. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 3, imagem 1 %32

    • Pull on one of the bottom corners to begin to pull off the back plate.

    Editar

  4. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 4, imagem 1 %32 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 4, imagem 2 %32

    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

    Editar

  5. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Battery: passo 5, imagem 1 %32

    • Remove the tape over the connectors on the motherboard and other side of the battery.

    Editar

  7. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 6, imagem 1 %32

    • Disconnect the red and black keyboard wires connecting the battery to the motherboard.

    Editar

  8. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 7, imagem 1 %32

    • Disconnect the black ribbon cable running over the battery. Flip up the black clamp and pull the cable out.

    Editar

  9. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 8, imagem 1 %32 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 8, imagem 2 %32

    • Remove the cable over the battery connecting the motherboard and the power connector.

    • Flip up the black clamp and pull the cable out.

    Editar

  10. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 9, imagem 1 %32 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 9, imagem 2 %32

    • Pull out battery. It is taped to the device so it is safe to pull out.

    • Look for damage to the battery. If damaged, make sure to not get any acid on your fingers.

    Editar

  11. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Antenna: passo 10, imagem 1 %32

    • Identify the grey wire on the right side of the device.

    Editar

  12. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 11, imagem 1 %32

    • Remove the orange ribbon cable over the wire.

    Editar

  13. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 12, imagem 1 %32

    • Remove the antenna using a soldering iron.

    Editar

  14. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Motherboard: passo 13, imagem 1 %32

    • Remove the blue and black wire from the top of the motherboard.

    Editar

  15. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 14, imagem 1 %32

    • Remove the screws from the motherboard.

    Editar

  16. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: passo 15, imagem 1 %32

    • Remove the motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Marcus Elysee

Membro desde: 10/25/19

97 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 Membro de UMass Dartmouth, Team S1-G8, O'Connell Fall 2019

UMASSD-O'CONNELL-F19S1G8

Membros da 3

Autoria de 4 guias

Um comentário

Where can I buy this motherboard?

waymond everett - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 8

Últimos 30 dias: 35

Duração total: 1,341