Pular para o conteúdo principal

Introdução

This guide provides the necessary information on fully disassembling the Proline HB25 hand blender.

  1. Unscrew the screw on the back of the product.
    • Unscrew the screw on the back of the product.

  2. Pull out the backtab of the housing. Push in the snapfits with, for instance, a screwdriver.
    • Pull out the backtab of the housing.

    • Push in the snapfits with, for instance, a screwdriver.

  3. Separate the housing with calibrated force. Keep your fingers away from the housing and do not bend or break the housing.
    • Separate the housing with calibrated force.

    • Keep your fingers away from the housing and do not bend or break the housing.

    • Use a flathead screwdriver to push out the lower function button.

    • Remove the separating device.

  4. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  5. Unscrew the hidden screw under the button.
    • Unscrew the hidden screw under the button.

  6. Open the housing. Unscrew the circuit board.
    • Open the housing.

    • Unscrew the circuit board.

    • Unscrew the wire lock.

  7. Push the housing of the button out of the housing. Push the housing of the button out of the housing.
    • Push the housing of the button out of the housing.

  8. Push on the side of the housing of the button to push the button out of the housing. The spring can jump away when you push out the button.
    • Push on the side of the housing of the button to push the button out of the housing.

    • The spring can jump away when you push out the button.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 51