Conserte seus objetos Comunidade Loja

PowerLead Puto PLD003 Zoom Button Replacement

Introdução

This guide shows how to remove the side panel from the camera, how to remove the back panel, and how to replace the zoom button.

O que você precisa

  1. PowerLead Puto PLD003 Zoom Button Replacement, Side Panel: passo 1, imagem 1 %32

    • Slide the battery eject button open to release the battery door.

    Editar

  2. PowerLead Puto PLD003 Zoom Button Replacement: passo 2, imagem 1 %32

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    Editar

  3. PowerLead Puto PLD003 Zoom Button Replacement: passo 3, imagem 1 %32

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    Editar

  4. PowerLead Puto PLD003 Zoom Button Replacement: passo 4, imagem 1 %32

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    Editar

  5. PowerLead Puto PLD003 Zoom Button Replacement, Zoom Button: passo 5, imagem 1 %32 PowerLead Puto PLD003 Zoom Button Replacement, Zoom Button: passo 5, imagem 2 %32

    • Remove the 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

    Editar

  7. PowerLead Puto PLD003 Zoom Button Replacement: passo 6, imagem 1 %32

    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

    Editar

  8. PowerLead Puto PLD003 Zoom Button Replacement: passo 7, imagem 1 %32

    • Apply pressure to the back panel, pulling away from the camera to remove it.

    Editar

  9. PowerLead Puto PLD003 Zoom Button Replacement: passo 8, imagem 1 %32 PowerLead Puto PLD003 Zoom Button Replacement: passo 8, imagem 2 %32

    • Remove the final 4 mm Phillips #1 screw holding the screen in place.

    • This screw is very small and hard to see.

    Editar

  10. PowerLead Puto PLD003 Zoom Button Replacement: passo 9, imagem 1 %32

    • Carefully apply pressure away from the camera to the screen to detach it from the body.

    • The white cord should still be connected to the body.

    • OPTIONAL: Remove the screen to make accessing the zoom button easier.

    Editar

  11. PowerLead Puto PLD003 Zoom Button Replacement: passo 10, imagem 1 %32

    • Remove the three 4 mm Phillips #1 screws holding the top panel in place.

    Editar

  12. PowerLead Puto PLD003 Zoom Button Replacement: passo 11, imagem 1 %32 PowerLead Puto PLD003 Zoom Button Replacement: passo 11, imagem 2 %32

    • Push upward on the top panel to remove it from the body of the camera.

    Editar

  13. PowerLead Puto PLD003 Zoom Button Replacement: passo 12, imagem 1 %32 PowerLead Puto PLD003 Zoom Button Replacement: passo 12, imagem 2 %32

    • Remove the two 4 mm Phillips #1 screws holding the circuit board in place.

    • Do not remove the silver screws.

    Editar

  14. PowerLead Puto PLD003 Zoom Button Replacement: passo 13, imagem 1 %32

    • Lift the circuit board out of the plastic casing.

    • Gently pull on the zoom button to remove it from the circuit board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 160