Conserte seus objetos Comunidade Loja

PowerLead Puto PLD003 Tripod Clip Replacement

Introdução

This guide shows how to remove the screws that hold the camera together, remove the side panel from the camera, and how to remove the tripod clip.

O que você precisa

  1. PowerLead Puto PLD003 Tripod Clip Replacement, Side Panel: passo 1, imagem 1 %32

    • Slide the battery eject button open to release the battery door.

    Editar

  2. PowerLead Puto PLD003 Tripod Clip Replacement: passo 2, imagem 1 %32

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    Editar

  4. PowerLead Puto PLD003 Tripod Clip Replacement: passo 3, imagem 1 %32

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    Editar

  5. PowerLead Puto PLD003 Tripod Clip Replacement: passo 4, imagem 1 %32

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    Editar

  6. PowerLead Puto PLD003 Tripod Clip Replacement, Tripod Clip: passo 5, imagem 1 %32 PowerLead Puto PLD003 Tripod Clip Replacement, Tripod Clip: passo 5, imagem 2 %32

    • Apply pressure upwards to remove the tripod clip.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 11

Duração total: 141