Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Install an original Airport 802.11b card internally.

Peças

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

  1. Using your thumbs, slide the lower case away from you.
    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  2. Your laptop should look approximately like this.
    • Your laptop should look approximately like this.

  3. Skip this step if your computer does not have an Airport card.
    • Skip this step if your computer does not have an Airport card.

    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas concluíram este guia.

Documentos anexados

iRobot

Membro desde: 24/09/2009

1 Reputação

648 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 6

Duração total: 9,298