Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

One RAM slot will accept PC2100 or PC2700 chips up to 1 GB.

  1. Use a coin to turn the battery locking screw 90 degrees to the right.
    • Use a coin to turn the battery locking screw 90 degrees to the right.

    • Lift the battery out of the computer.

  2. Remove the four Phillips screws from the memory door.
    • Remove the four Phillips screws from the memory door.

    • Slide the memory door away from the memory compartment.

  3. Release the tabs on each side of the RAM chip at the same time.  These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • Pull the chip directly out from its connectors.

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas concluíram este guia.

Documentos anexados

iRobot

Membro desde: 24/09/2009

1 Reputação

648 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 10,446