Remove the Ni-Cad battery from the PowerBook 180. Slide the arrows toward the front of the computer until the battery can slide out.
  • Remove the Ni-Cad battery from the PowerBook 180.

  • Slide the arrows toward the front of the computer until the battery can slide out.

Adicionar comentário

Removing the screws securing the bottom plate from the PowerBook 180. There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.
  • Removing the screws securing the bottom plate from the PowerBook 180.

  • There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.

Adicionar comentário

Your computer should look like the two pictures after the bottom plate is removed. Your computer should look like the two pictures after the bottom plate is removed.
  • Your computer should look like the two pictures after the bottom plate is removed.

Adicionar comentário

Locate the modem board, which is next to the DC-in port. There are two Torx T8 screws marked in red in the pictures.  Remove these screws and pull up on the modem board to remove.
  • Locate the modem board, which is next to the DC-in port.

  • There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.

  • To reassemble your PowerBook, follow these instructions in reverse.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Jack Byrnes

Member since: 17-10-2010

1.148 reputação

2 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

277 Membros

723 Guides authored

Great guide. Worked for me of the Powerbook 140. Thanks!

Jack - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 6

Todo: 967