Conserte seus objetos Comunidade Loja

PowerA Enhanced Wireless Controller Directional Pad Replacement

Introdução

This guide will show you how to access and replace the directional pad of your PowerA Enhanced Wireless Controller. Built-up residue can cause complications with the directional pad. As this cannot always be cleaned away with a Q-tip and rubbing alcohol, it may be necessary to disassemble the controller to either clean beneath the directional pad or change it entirely. Follow the steps provided to do so.

O que você precisa

  1. PowerA Enhanced Wireless Controller Directional Pad Replacement, Motherboard: passo 1, imagem 1 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement, Motherboard: passo 1, imagem 2 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement, Motherboard: passo 1, imagem 3 %32

    • Remove the battery cover by pressing down on the lever located on the top of the cover.

    • Apply pressure until it clicks out of place, and pull it off.

    Editar

  2. PowerA Enhanced Wireless Controller Directional Pad Replacement: passo 2, imagem 1 %32

    • Remove all eight screws using the J0 screwdriver.

    Editar

  4. PowerA Enhanced Wireless Controller Directional Pad Replacement: passo 3, imagem 1 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement: passo 3, imagem 2 %32

    • Insert the iFixit opening tool into the seam and gently pry the cover plate up.

    • Remove the cover plate once it is loosened.

    Editar

  5. PowerA Enhanced Wireless Controller Directional Pad Replacement: passo 4, imagem 1 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement: passo 4, imagem 2 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement: passo 4, imagem 3 %32

    • Remove all three screws securing the motherboard using the J00 screwdriver.

    • Remove the motherboard.

    Editar

  6. PowerA Enhanced Wireless Controller Directional Pad Replacement, Directional Pad: passo 5, imagem 1 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement, Directional Pad: passo 5, imagem 2 %32 PowerA Enhanced Wireless Controller Directional Pad Replacement, Directional Pad: passo 5, imagem 3 %32

    • Use the rubber tweezers to grab the center of the directional pad and pull it out by pinching its center.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Ayjah Montgomery

Membro desde: 10/10/19

402 Reputação

Autoria de 4 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team S1-G5, Leahy Fall 2019 Membro de USF Tampa, Team S1-G5, Leahy Fall 2019

USFT-LEAHY-F19S1G5

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 9

Duração total: 936