Conserte seus objetos Comunidade Loja

Power Removal

Introdução

In order for you to remove components with power supplied to them, you need to remove the power from the device by disconnecting from the main power source.

O que você precisa

  1. Power Removal, Power Removal: passo 1, imagem 1 %32 Power Removal, Power Removal: passo 1, imagem 2 %32 Power Removal, Power Removal: passo 1, imagem 3 %32

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Place the device on a firm surface with the device screen facing down.

    Editar

  2. Power Removal: passo 2, imagem 1 %32 Power Removal: passo 2, imagem 2 %32

    • Remove 2, 6.1 mm Phillips J000 screws from the back of the device.

    • If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. How to Remove a Stripped Screw

    Editar

  4. Power Removal: passo 3, imagem 1 %32 Power Removal: passo 3, imagem 2 %32 Power Removal: passo 3, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Plastic Cards
    $2.99
    Comprar

    • Using a plastic tool and the plastic card, gently pry off the back cover.

    Editar

  5. Power Removal: passo 4, imagem 1 %32 Power Removal: passo 4, imagem 2 %32 Power Removal: passo 4, imagem 3 %32

    • Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Um comentário

Thank you. It got me along to open my Venturer. Wish I could send a picture of the failure.

Tl Sn - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 5

Duração total: 673