Ir para o conteúdo principal

Power Macintosh G3 Blue and White RAM Replacement

O que você precisa

  1. Power Macintosh G3 Blue and White RAM Replacement, RAM: passo 1, imagem 1 %32
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Power Macintosh G3 Blue and White RAM Replacement: passo 2, imagem 1 %32
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

    • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

  3. Power Macintosh G3 Blue and White RAM Replacement: passo 3, imagem 1 %32 Power Macintosh G3 Blue and White RAM Replacement: passo 3, imagem 2 %32
    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

[deleted]

Membro desde: 08/28/18

26.328 Reputação

Autoria de 21 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 21

Duração total: 933