Ferramentas

Não são necessárias ferramentas.

Peças

  1. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Locate the PRAM battery.
    • Locate the PRAM battery.

    • The PRAM battery is usually at the top right corner of the logic board.

  4. Lift the battery out of the PRAM battery holder.
    • Lift the battery out of the PRAM battery holder.

      • What I did to free the PRAM battery is I broke the plastic battery holder identical to the circled one on the other side of the PRAM battery, then I was able to free the PRAM battery. I couldn't get the PRAM battery to budge without breaking the holder.

      • Don't be worried, breaking the plastic holder won't cause much damage nor will it hinder the ability for the PRAM battery to stay in place. Only break one holder, though.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Member since: 28-08-2018

15.659 reputação

22 Guides authored

Equipe

NIWOTech Membro de NIWOTech

Community

0 Membros

0 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 17

Todo: 72