Ir para o conteúdo principal

Introdução

I wasn’t able to find a replacement modem assembly online so you are on your own for that part.

Peças

Nenhum componente especificado.

  1. Power Macintosh G3 Blue and White Modem Replacement, Before opening up your Power Mac...: passo 1, imagem 1 %32
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

  2. Power Macintosh G3 Blue and White Modem Replacement: passo 2, imagem 1 %32
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  3. Power Macintosh G3 Blue and White Modem Replacement: passo 3, imagem 1 %32
    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

  4. Power Macintosh G3 Blue and White Modem Replacement: passo 4, imagem 1 %32
    • Disconnect the modem’s flex cable from the connector on the logic board.

    • Lift the modem assembly out of it´s place on the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

[deleted]

Membro desde: 28/08/2018

24.592 Reputação

21 Guias de autoria

0 Comments

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 11

Duração total: 377