Introdução

Repairing the optical drive in the Power Mac G4 Quicksilver.

Peças

Não são necessárias peças.

The handle to open your computer is located on top of the right side panel.
  • The handle to open your computer is located on top of the right side panel.

Adicionar comentário

Grab the circular handle and pull outward.
  • Grab the circular handle and pull outward.

Adicionar comentário

  • Your computer is now open and ready for repair.

Adicionar comentário

  • The optical drive is in the top left corner of the case.

Adicionar comentário

  • There are four screws to be removed.

  • The first screw can be seen in the first picture.

  • The remaining three screws can be seen in the second picture.

Adicionar comentário

  • Remove the optical drive by pulling the drive away from the front of the computer and out.

Adicionar comentário

  • Detach the two cables attached to the back of the drive.

  • The flat ribbon cable can be detached by pulling the silver tab. The multicolored cable can be removed by grasping the plastic connector on either side and pulling with substantial force.

Adicionar comentário

  • Remove the four screws holding the enclosure to the drive.

Adicionar comentário

  • Push on the back of the drive (side with the connectors) to slide the drive out of the enclosure.

  • Your optical drive is now ready to be replaced.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas concluíram este guia.

Ryan Bylard

Member since: 20-01-2010

1.230 reputação

5 Guides authored

Equipe

Cal Poly, Team 14-41, Regan Winter 2010 Membro de Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Membros

10 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 19

Todo: 9,886