Conserte seus objetos Comunidade Loja

Power Mac G4 Cube Airport Card Replacement

Introdução

Installing the Airport Card involves removing the outer case.

  1. Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: passo 1, imagem 1 %32 Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: passo 1, imagem 2 %32 Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: passo 1, imagem 3 %32

    • Release the handle at the bottom of the Power Mac G4 Cube by pushing it down. Slowly pull out the cube by holding the end of the handle.

    • Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

    Editar

  3. Power Mac G4 Cube Airport Card Replacement, Accessing AirPort Card: passo 2, imagem 1 %32 Power Mac G4 Cube Airport Card Replacement, Accessing AirPort Card: passo 2, imagem 2 %32

    • Pull outwards on the antenna cable.

    • The cable should pop out of the card without much force.

    • Pull on the clear tab outwards to remove the existing AirPort card

    • Slide in the new AirPort card.

    • Reconnect the antenna cable.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Ryan Chun

Membro desde: 06/24/10

1.076 Reputação

Autoria de 7 guias

Emblemas: 13

+10 outros emblemas

Equipe

Cal Poly, Team 2-7, Johann Summer 2010 Membro de Cal Poly, Team 2-7, Johann Summer 2010

CPSU-JOHANN-R10S2G7

Membros da 5

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 12

Últimos 30 dias: 23

Duração total: 9,848