Conserte seus objetos Comunidade Loja

Porter-Cable 382 On/ Off Switch Replacement

O que você precisa

  1. Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: passo 1, imagem 1 %32 Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: passo 1, imagem 2 %32

    • First, locate the three screws on the top of the sander.

    • Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

    Editar

  3. Porter-Cable 382 On/ Off Switch Replacement: passo 2, imagem 1 %32 Porter-Cable 382 On/ Off Switch Replacement: passo 2, imagem 2 %32

    • Locate your on off switch and in order to remove it you must slide it out of its slot.

    • This shouldnt require any special tools, just wiggle the switch up and out.

    • Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

    Editar

  4. Porter-Cable 382 On/ Off Switch Replacement: passo 3, imagem 1 %32

    • Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.

    • Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Nick O'Sadcia

Membro desde: 03/11/16

421 Reputação

Autoria de 3 guias

Emblemas: 6

+3 outros emblemas

Equipe

UMass Dartmouth, Team 8-7, Botvin Spring 2016 Membro de UMass Dartmouth, Team 8-7, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G7

Membros da 3

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 230