Peças

Não são necessárias peças.

On the left-hand side of the camera, unscrew and remove the four 3mm screws, as shown in the photograph. On the right-hand side of the camera, unscrew and remove the two 3mm screws. On the bottom of the camera, unscrew and remove the three 3mm screws.
  • On the left-hand side of the camera, unscrew and remove the four 3mm screws, as shown in the photograph.

  • On the right-hand side of the camera, unscrew and remove the two 3mm screws.

  • On the bottom of the camera, unscrew and remove the three 3mm screws.

Adicionar comentário

Slide open the battery door and use a  plastic opening tool to slightly open the side of the case.
  • Slide open the battery door and use a plastic opening tool to slightly open the side of the case.

Adicionar comentário

When performing the next step, be sure to not pull the cover off completely because it is still attached to the logic board.
  • When performing the next step, be sure to not pull the cover off completely because it is still attached to the logic board.

  • Gently pull the cover with the LCD screen attached away from the rest of the camera.

Adicionar comentário

Locate where the LCD screen ribbon is attached to the logic board. Using a plastic opening tool, flip the black tab that connects the LCD screen ribbon to the logic board up.
  • Locate where the LCD screen ribbon is attached to the logic board.

  • Using a plastic opening tool, flip the black tab that connects the LCD screen ribbon to the logic board up.

Adicionar comentário

Gently pull the ribbon away from the logic board.
  • Gently pull the ribbon away from the logic board.

Adicionar comentário

Locate the four screws in each corner of the LCD screen, unscrew and remove these screws.
  • Locate the four screws in each corner of the LCD screen, unscrew and remove these screws.

Adicionar comentário

Remove the LCD screen from the remaining casing of the camera.
  • Remove the LCD screen from the remaining casing of the camera.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

ashley

Member since: 24-06-2010

1 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 3-4, Johann Summer 2010 Membro de Cal Poly, Team 3-4, Johann Summer 2010

CPSU-JOHANN-R10S3G4

4 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 18

Últimos 30 dias: 54

Todo: 2,940