Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.
  • Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.

It may be easier to push the pins out in one direction. Unfortunately, I do not recall which direction was easier…

Nathan Gelderloos - Responder

Apply an upward pressure to the holes until the locking pins release.
  • Apply an upward pressure to the holes until the locking pins release.

  • Use precision tweezers to remove the pins that connect the face with the strap.

Adicionar comentário

  • Once the pins are released, the old wrist strap should snap off.

  • Simply lock the new wrist strap into place.

Adicionar comentário

  • Use the T5 head on the iFixit screwdriver to unscrew the four screws on the back of the watch’s face.

Adicionar comentário

  • Gently remove the backing from the watch.

Adicionar comentário

  • Use tweezers to gently pry the golden sensor away from the battery.

  • Remove battery using the plastic opening tools.

Adicionar comentário

  • Detach the screen from the screen protector using a PH000 screwdriver.

Adicionar comentário

  • Attach a new screen to the screen protector.

  • Make sure that the charging port remains accessible, as it can easily become detached during the replacement.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nicholas Sanders

Member since: 28-09-2017

267 reputação

2 Guides authored

Equipe

Hi, where can i buy the replacement?

Thanks

Mario Sánchez-Barriga Marín - Responder

hi,where can I buy the usb replacement.

GamesFISH_1989 - Responder

Hi, were can i buy the replacement. Thanks

Julien Genon - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 56

Últimos 30 dias: 285

Todo: 1,680