Pular para o conteúdo principal

Introdução

How to Replace a Cracked or Broken Button on a Pokewalker

Peças

Nenhum componente especificado.

  1. Locate the Screw on the Back of the Pokewalker.
    • Locate the Screw on the Back of the Pokewalker.

  2. Remove the Screw with a Phillips #0 Screwdriver
    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

  3. Remove the Rear Cover from the Device
    • Remove the Rear Cover from the Device

  4. Use the flat end of a Spudger to Remove the Battery
    • Use the flat end of a Spudger to Remove the Battery

  5. PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora

    PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora
    • Locate the 4 Screws Around the Device

    • Remove all 4 screws with a Y0 Triwing Screwdriver

    • Separate the 2 halves of the Device

    • Do not Separate Completely as the Display is Still Connected by a Ribbon Cable

    • Use a Spudger to Flip the Latch holding the ribbon cable in place and use Tweezers to Pull it out

    • Do not use Excessive force when reinserting the cable, because ribbon cables are fragile

    • Remove the Rubber-button thingy from the upper case

    • I have no idea what that thing is, edit this guide if you do.

    • Remove the 3 Plastic Buttons from the Case

    • It helps that the buttons only go in one way, makes it easier to reassemble

Conclusão

To reassemble your device, follow these instructions in reverse order.

Winni Stuart

Membro desde: 13-04-2014

337 reputação

2 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Todo: 384