Ir para o conteúdo principal

Playstation 3 Motherboard Enclosure Replacement

Guia arquivado
Este guia é mantido exclusivamente para fins históricos. Use a versão atualizada do guia para executar o reparo.

O que você precisa

  1. Playstation 3 Motherboard Enclosure Replacement, Top Cover: passo 1, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement, Top Cover: passo 1, imagem 2 %32
    • Remove the rubber screw cover near the hard drive cover with a spudger.

  2. Playstation 3 Motherboard Enclosure Replacement: passo 2, imagem 1 %32
    • Remove the screw holding the top cover in place with a Torx T10 screwdriver.

  3. Playstation 3 Motherboard Enclosure Replacement: passo 3, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement: passo 3, imagem 2 %32
    • Slide the top cover down about half an inch.

    • Lift the cover off of the PS3.

  4. Playstation 3 Motherboard Enclosure Replacement: passo 4, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement: passo 4, imagem 2 %32
    • Remove the seven screws in the top cover with a Phillips #2 screwdriver.

    • One of the screws is shorter than the others. The short screw is marked in yellow.

  5. Playstation 3 Motherboard Enclosure Replacement: passo 5, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement: passo 5, imagem 2 %32 Playstation 3 Motherboard Enclosure Replacement: passo 5, imagem 3 %32
    • You can now lift off the top cover.

  6. Playstation 3 Motherboard Enclosure Replacement, Power Supply: passo 6, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement, Power Supply: passo 6, imagem 2 %32
    • Unplug the white wires connected to the wireless board. There are two sets of wires: one set in the front, one in the back.

    • Push down the tab on the connector to disconnect the wires.

    • Remove the two screws on the front of the power supply.

  7. Playstation 3 Motherboard Enclosure Replacement: passo 7, imagem 1 %32
    • Remove the screws on the back of the power supply with a Phillips #2 screwdriver.

  8. Playstation 3 Motherboard Enclosure Replacement: passo 8, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement: passo 8, imagem 2 %32
    • Remove the power supply by lifting it straight up.

  9. Playstation 3 Motherboard Enclosure Replacement, Motherboard Enclosure: passo 9, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement, Motherboard Enclosure: passo 9, imagem 2 %32
    • Unplug the optical drive power cable.

    • Detach the ribbon cable that connects the optical drive to the motherboard.

    • Set the optical drive aside.

  10. Playstation 3 Motherboard Enclosure Replacement: passo 10, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement: passo 10, imagem 2 %32
    • Remove three screws (Phillips #2) from the wireless board and antenna.

    • Detach the ribbon cable that connects the wireless board to the motherboard.

  11. Playstation 3 Motherboard Enclosure Replacement: passo 11, imagem 1 %32
    • Remove nine screws (Phillips #2) from the perimeter of the metal plate covering the motherboard.

  12. Playstation 3 Motherboard Enclosure Replacement: passo 12, imagem 1 %32 Playstation 3 Motherboard Enclosure Replacement: passo 12, imagem 2 %32 Playstation 3 Motherboard Enclosure Replacement: passo 12, imagem 3 %32
    • Remove the hard drive door with a spudger.

    • Lift the metal enclosure out of the plastic bottom case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

iDeleted

Membro desde: 07/07/10

2.101 Reputação

Autoria de 39 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,901