Introdução

This guide takes you through installing a camera on the PlayStation Vita.

Power off and remove the memory card.
  • Power off and remove the memory card.

  • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

Adicionar comentário

Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
  • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

  • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

Adicionar comentário

  • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

Adicionar comentário

  • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

  • Continue working your way around the device gently prying it open.

  • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

Adicionar comentário

  • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

Adicionar comentário

  • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

Adicionar comentário

  • Free the battery cable by gently prying up on the connection with a spudger.

Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

Jimbo Jones - Responder

This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

ylimakiminna - Responder

Yea I messed up there too. Is there a way to fix it?

Alethia Henry - Responder

  • Separate the front and rear cases.

Adicionar comentário

  • Release the camera flex cable socket by prying up on the tab with a spudger. Leave the socket open.

Adicionar comentário

  • Using a spudger, gently pry up the camera.

  • Work your way under the camera and along the camera flex cable, using the pointy tip of the spudger to peel away the adhesive, freeing the camera.

  • Carefully lift and remove the camera.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Brittany McCrigler

Member since: 05-03-2012

79.193 reputação

134 Guides authored

Equipe

iFixit Membro de iFixit

Community

107 Membros

6.517 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 61

Todo: 4,705