Conserte seus objetos Comunidade Loja

PlayStation VR Processor Unit Cooling Fan Replacement

Introdução

A damaged or broken cooling fan can make your system overheat so it is important to replace it if that happens in order to prevent any further damage to the system.

O que você precisa

  1. PlayStation VR Processor Unit Cooling Fan Replacement, Processor Unit Cooling Fan: passo 1, imagem 1 %32 PlayStation VR Processor Unit Cooling Fan Replacement, Processor Unit Cooling Fan: passo 1, imagem 2 %32 PlayStation VR Processor Unit Cooling Fan Replacement, Processor Unit Cooling Fan: passo 1, imagem 3 %32

    • On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.

    Editar

  2. PlayStation VR Processor Unit Cooling Fan Replacement: passo 2, imagem 1 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 2, imagem 2 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 2, imagem 3 %32

    • Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw.

    • Unscrew the 6mm screw with a PH #000 screwdriver.

    Editar

  3. PlayStation VR Processor Unit Cooling Fan Replacement: passo 3, imagem 1 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 3, imagem 2 %32

    • Slide the panel back into place.

    Editar

  5. PlayStation VR Processor Unit Cooling Fan Replacement: passo 4, imagem 1 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 4, imagem 2 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 4, imagem 3 %32

    • Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports.

    • You will probably need to lift it on both sides in order for the panel to come loose.

    Editar

  6. PlayStation VR Processor Unit Cooling Fan Replacement: passo 5, imagem 1 %32

    • Turn the console over.

    • Unscrew the two 9 mm screws with a PH #000 screwdriver.

    Editar

  7. PlayStation VR Processor Unit Cooling Fan Replacement: passo 6, imagem 1 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 6, imagem 2 %32

    • With the plastic opening tool, carefully pry the console shell panel free and lift it away.

    Editar

  8. PlayStation VR Processor Unit Cooling Fan Replacement: passo 7, imagem 1 %32 PlayStation VR Processor Unit Cooling Fan Replacement: passo 7, imagem 2 %32

    • Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console.

    • Carefully lift the fan and its wiring from the device.

    • Be mindful of damaging the wires.

    • Take care to keep your fingers away from the fan blades.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Sarah Shand

Membro desde: 02/20/17

1.885 Reputação

Autoria de 7 guias

Emblemas: 12

+9 outros emblemas

Equipe

USF Tampa, Team S3-G1, Sullivan Spring 2017 Membro de USF Tampa, Team S3-G1, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G1

Membros da 3

Autoria de 13 guias

4 comentários

Where do I get a replacement fan tho?

Ponos King - Responder

I think is a 3x3 cm fan, alliexpres has some, but what voltage?

crus - Responder

5V is what i have read

Ethan Amos -

Reference for fan when I have replaced mine : DELTA ELECTRONICS MODEL : ASB0305MA-01 DC 5V 0.19A

herossuperman - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 11

Últimos 30 dias: 47

Duração total: 8,713