Ir para o conteúdo principal

PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001

Guia arquivado
Este guia é mantido exclusivamente para fins históricos. Use a versão atualizada do guia para executar o reparo.

O que você precisa

  1. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001, Optical Drive from a SCPH-7501: passo 1, imagem 1 %32
    • Remove the parallel port cover on the back of the PlayStation

  2. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 2, imagem 1 %32
    • Flip over the PlayStation and remove the six screws from the bottom.

  3. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 3, imagem 1 %32
    • Turn the PlayStation upright. Remove the cover by lifting it up.

  4. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 4, imagem 1 %32
    • Carefully disconnect the gold-colored ribbon cable from it's connector.

    • To avoid damaging the cable, pull it by the white, reinforced tab.

  5. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 5, imagem 1 %32
    • Disconnect the second cable by pulling up on the plastic connector at the end.

  6. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 6, imagem 1 %32
    • Lift the optical drive off of the PlayStation.

  7. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 7, imagem 1 %32
    • Remove the two screws and take off the bottom piece for your new Optical drive from the old one.

  8. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 8, imagem 1 %32
    • Take the new lens either from a SCPH-7501 or SCPH-9001.

    • To avoid damaging the cable, Gently lift on this gold-colored cable that has a pot screw on it and lift it, but not too much.

  9. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 9, imagem 1 %32
    • Take the bottom piece and screw the two screws on the new Optical Drive.

  10. PlayStation Optical Drive Replacement from a SCPH-7501 or SCPH-9001: passo 10, imagem 1 %32
    • Plug the cables back in. Your work should look like this. Put it back together, plug it in, turn it on and see if it works.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Unchi

Membro desde: 10/27/13

367 Reputação

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,175