Ir para o conteúdo principal

O que você precisa

  1. PlayStation 3 Slim Top Shield Assembly Replacement, Top Shield Assembly: passo 1, imagem 1 %32
    • Disconnect the DC-In and Blu-ray power cables from the motherboard.

    • Pull the cables straight upward to lift the connectors up and out of their sockets on the motherboard.

  2. PlayStation 3 Slim Top Shield Assembly Replacement: passo 2, imagem 1 %32
    • Pull the fan cables straight up to lift the fan connector up and out of its socket on the motherboard.

  3. PlayStation 3 Slim Top Shield Assembly Replacement: passo 3, imagem 1 %32
    • Remove the following nine screws holding the motherboard assembly together:

    • Four 14.8 mm shouldered Phillips

    • Five 9.5 mm Phillips

  4. PlayStation 3 Slim Top Shield Assembly Replacement: passo 4, imagem 1 %32
    • Remove the two heat sink clamps from the bottom of the motherboard assembly.

  5. PlayStation 3 Slim Top Shield Assembly Replacement: passo 5, imagem 1 %32
    • If necessary, gently pry the motherboard off the top shield near the heat sink and its shroud.

  6. PlayStation 3 Slim Top Shield Assembly Replacement: passo 6, imagem 1 %32 PlayStation 3 Slim Top Shield Assembly Replacement: passo 6, imagem 2 %32
    • Gently press the board away from the top shield assembly near the fan connector and the corner of the board near the wireless sockets.

  7. PlayStation 3 Slim Top Shield Assembly Replacement: passo 7, imagem 1 %32
    • Lift the top shield assembly off the motherboard from its front edge.

    • Be careful not to damage the sockets as you rotate the top shield assembly away from the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,740