Ir para o conteúdo principal

PlayStation 3 Slim Top Cover Replacement

O que você precisa

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: passo 1, imagem 1 %32
    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

  2. PlayStation 3 Slim Top Cover Replacement: passo 2, imagem 1 %32 PlayStation 3 Slim Top Cover Replacement: passo 2, imagem 2 %32
    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

  3. PlayStation 3 Slim Top Cover Replacement: passo 3, imagem 1 %32
    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

  4. PlayStation 3 Slim Top Cover Replacement: passo 4, imagem 1 %32
    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

  5. PlayStation 3 Slim Top Cover Replacement: passo 5, imagem 1 %32 PlayStation 3 Slim Top Cover Replacement: passo 5, imagem 2 %32
    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

Conclusão

To reassemble your device, follow these instructions in reverse order.

91 outras pessoas executaram este guia.

2 comentários

No good mine a Sony.

james register - Responder

Thank you this helped me so much!!!!

Megan Davis - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 64

Últimos 30 dias: 330

Duração total: 72,991