Menu

Your Settings

Minha bancada de trabalho

Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Carrinho

Parece que seu carrinho de compras está vazio

Visite Nossa Loja

PlayStation 3 Slim - Manually Removing Stuck Disk

Escrito Por: ZFix (e 3 outros contribuidores)
  • Comentários: 1
  • Favoritos: 46
  • Execuções: 14

Dificuldade

Moderado

Passos

5

Tempo necessário

20 - 45 minutos

Seções

1

Sinalizadores

1

Member-Contributed Guide

Guia contribuído por membro

Um membro impressionante de nossa comunidade fez este guia. Não é gerenciado pela equipe iFixit.

Introdução

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

Vídeo de Apresentação

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    Editar

  2. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

    • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

    Editar

  3. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

  4. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

    • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

    Editar

  5. In this case we have ... 4x disks. :) .

    • In this case we have ... 4x disks. :)

    • .

    • Did you do it successfully?

    Editar

  6. Test the console before assembling. And don't forget to put the spindle disc magnet. Test the console before assembling. And don't forget to put the spindle disc magnet.

    • Test the console before assembling. And don't forget to put the spindle disc magnet.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

14 outras pessoas concluíram este guia.

Autor

com 3 outros contribuidores

ZFix

Membro desde: 09-12-2013

163.980 reputação

305 Guias de autoria

Emblemas: 35

+32 emblemas

Equipe

Master Techs Membro de Master Techs

Community

286 Membros

808 Guias de autoria

0 comentários

Adicionar um comentário

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 20

Últimos 30 dias: 114

Todo: 12,207