Ir para o conteúdo principal

PlayStation 3 Motherboard Assembly Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. PlayStation 3 Motherboard Assembly Replacement, Motherboard Assembly: passo 1, imagem 1 %32
    • Pull the control board ribbon cable straight up and out of its socket on the motherboard.

  2. PlayStation 3 Motherboard Assembly Replacement: passo 2, imagem 1 %32 PlayStation 3 Motherboard Assembly Replacement: passo 2, imagem 2 %32
    • Remove the two 12 mm Phillips screws securing the control board to the lower case.

    • Remove the control board and its attached cable from the PS3.

  3. PlayStation 3 Motherboard Assembly Replacement: passo 3, imagem 1 %32
    • Remove the following eight screws securing the motherboard assembly to the lower case:

    • Seven 12 mm Phillips screws (ph2)

    • One 30 mm Phillips screw

  4. PlayStation 3 Motherboard Assembly Replacement: passo 4, imagem 1 %32
    • Remove the control board bracket.

  5. PlayStation 3 Motherboard Assembly Replacement: passo 5, imagem 1 %32 PlayStation 3 Motherboard Assembly Replacement: passo 5, imagem 2 %32
    • Use the flat end of a spudger to pry the hard drive bay cover away from the lower case.

    • Remove the hard drive bay cover.

  6. PlayStation 3 Motherboard Assembly Replacement: passo 6, imagem 1 %32
    • Lift the motherboard assembly out of the lower case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,197