Conserte seus objetos Comunidade Loja

PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

Introdução

Follow this guide to replace the power supply on your PlayStation 2 Slimline.

O que você precisa

  1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Lower Smart Plate: passo 1, imagem 1 %32

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Traduzir

  2. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 2, imagem 1 %32

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Traduzir

  3. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 3, imagem 1 %32

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Traduzir

  5. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 4, imagem 1 %32 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 4, imagem 2 %32

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Traduzir

  6. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 5, imagem 1 %32

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Traduzir

  7. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 6, imagem 1 %32 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 6, imagem 2 %32

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Traduzir

  8. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Power Supply: passo 7, imagem 1 %32

    • Remove the Phillips screw from the power supply.

    Traduzir

  9. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: passo 8, imagem 1 %32

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    Traduzir

    • Lift the power supply straight up and out of the PS2.

    Traduzir
Conclusão

To reassemble your device, follow the above steps in reverse order.

2 outras pessoas executaram este guia.

Um agradecimento especial a esses tradutores:

de en

100%

MrJulian

shingle

Estes tradutores estão nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

MrJulian

Membro desde: 10/22/20

1.543 Reputação

Autoria de 7 guias

Emblemas: 18

+15 outros emblemas

Um comentário

I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣

Memozit - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 21

Últimos 30 dias: 89

Duração total: 631