Conserte seus objetos Comunidade Loja

PlayStation 2 Slimline SCPH-900xx Fan Replacement

Introdução

Follow this guide to replace the fan of your PlayStation 2 Slimline.

O que você precisa

  1. PlayStation 2 Slimline SCPH-900xx Fan Replacement, Lower Smart Plate: passo 1, imagem 1 %32

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Traduzir

  2. PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 2, imagem 1 %32

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Traduzir

  3. PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 3, imagem 1 %32

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Traduzir

  5. PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 4, imagem 1 %32 PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 4, imagem 2 %32

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Traduzir

  6. PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 5, imagem 1 %32

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Traduzir

  7. PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 6, imagem 1 %32 PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 6, imagem 2 %32

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Traduzir

  8. PlayStation 2 Slimline SCPH-900xx Fan Replacement, Fan: passo 7, imagem 1 %32

    • Pull the ribbon cable straight out from the socket.

    • To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable. If you can, apply the force to the plastic reinforcement rather than the cable itself.

    Traduzir

  9. PlayStation 2 Slimline SCPH-900xx Fan Replacement: passo 8, imagem 1 %32

    • Remove three Phillips #0 screws securing the fan.

    Traduzir

    • Lift the fan straight up and out of the PS2.

    Traduzir
Conclusão

To reassemble your device, follow the above steps in reverse order.

Uma outra pessoa concluiu este guia.

Um agradecimento especial a esses tradutores:

de en

100%

MrJulian

MrJulian está nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

MrJulian

Membro desde: 10/22/20

1.543 Reputação

Autoria de 7 guias

Emblemas: 18

+15 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 9

Últimos 30 dias: 43

Duração total: 375