Conserte seus objetos

Direito de executar reparos

Loja

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

PlayStation 2 Slimline SCPH-7500x Fan Replacement

Escrito Por: Jared Hirata (e 13 outros contribuidores)
  • Comentários: 1
  • Favoritos: 5
  • Execuções: 2

Dificuldade

Moderado

Passos

10

Tempo necessário

15 minutos

Partes

2

Sinalizadores

4

In Progress

Em progresso

Este guia está em progresso. Atualize para acompanhar as últimas mudanças!

Confusing Text

Texto confuso

Alguns dos textos deste guia é confuso, duplicado ou fora-tópico. Melhore-o!

Markup Mishap

Acidente de Marcação

Este guia precisa de melhores marcações. Ajude corrigindo ou fazendo algumas marcações.

Needs More Images

Precisa de mais images

Mais algumas imagens faria os procedimentos deste guia ficarem mais claros.

Introdução

This guide will walk you through step-by-step on how to properly remove and install the fan in the PlayStation 2 Slimline.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

    • Turn off the PlayStation 2 (or PS2) and carefully unplug from the power source. Check to see there are no discs inside the console before flipping the game system upside-down.

    Editar

  2. Locate the six feet on the bottom of the PS2.

    • Locate the six feet on the bottom of the PS2.

    • Five of the feet are in plain sight and one of the feet is located under the black void sticker on the bottom of the device.

    • Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or even the screw should be in plain sight.

    Editar

  3. Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers. Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers. Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers.

    • Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers.

    Editar

  4. The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath. The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath.

    • The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath.

    Editar

  6. After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2. After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2. After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

    • After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

    Editar

  7. Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves. Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves. Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.

    • Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.

    Editar

  8. If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

    • If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

    Editar

  9. Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring. Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring. Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring.

    • Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring.

    Editar

  10. With tweezers, detach the terminal to the cord from the motherboard to the fan. With tweezers, detach the terminal to the cord from the motherboard to the fan.

    • With tweezers, detach the terminal to the cord from the motherboard to the fan.

    Editar

  11. Locate and unscrew the three 1.6mm screws located next to the base of the fan. Locate and unscrew the three 1.6mm screws located next to the base of the fan.

    • Locate and unscrew the three 1.6mm screws located next to the base of the fan.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Autor

com 13 outros contribuidores

Jared Hirata

Membro desde: 09/04/2013

595 Reputação

7 Guias de autoria

Emblemas: 12

+9 outros emblemas

Equipe

Cal Poly, Team 17-4, Regan Spring 2013 Membro de Cal Poly, Team 17-4, Regan Spring 2013

CPSU-REGAN-S13S17G4

3 Membros

14 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 9

Últimos 30 dias: 46

Duração total: 2,426