1. Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console. Caution with the "Do not void" seal, underneath is also a screw Caution with the "Do not void" seal, underneath is also a screw
    • Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.

    • Caution with the "Do not void" seal, underneath is also a screw

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. If all screws are removed. Use a metal spunger to open the chassis
    • If all screws are removed.

    • Use a metal spunger to open the chassis

  4. Slip the three cables out of the sockets. Use a PH01 screwdriver to remove the four screws securing the optical drive Lift up the optical drive and remove the duct tape under the flex cable.
    • Slip the three cables out of the sockets.

    • Use a PH01 screwdriver to remove the four screws securing the optical drive

    • Lift up the optical drive and remove the duct tape under the flex cable.

    • Now the optical drive is free and ready for replacement

Conclusão

To reassemble your device, follow these instructions in reverse order.

11 outras pessoas concluíram este guia.

tlroesner

Member since: 13-05-2012

1.788 reputação

4 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 7

Últimos 7 dias: 30

Últimos 30 dias: 122

Todo: 15,573