Ir para o conteúdo principal

Introdução

Planet Eclipse Geo3 Battery Replacement

Ferramentas

Peças

  1. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
    • Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.

  2. Pull the grip away from the frame. Pull the grip away from the frame.
    • Pull the grip away from the frame.

  3. Pull the grip through the opening. The grip is connected in the middle and is one piece.
    • Pull the grip through the opening.

    • The grip is connected in the middle and is one piece.

  4. Push out top of battery from left side of grip. Push out top of battery from left side of grip.
    • Push out top of battery from left side of grip.

  5. Push new battery into right side of grip, inserting the bottom first.
    • Push new battery into right side of grip, inserting the bottom first.

    • Be sure to match the signs of the battery and the terminals. The terminals are labeled just above the battery on the right side.

Conclusão

To reassemble your device, follow the Disassembling Planet Eclipse Geo3 Grip in reverse.

Uma outra pessoa concluiu este guia.

Rett Triplett

Membro desde: 18/10/2013

801 Reputação

8 Guias de autoria

Equipe

Clemson, Team 13-6, Benson Fall 2013 Membro de Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 Membros

8 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 774