Introdução
Use this guide to replace the display screen of your Pipo S1 Tablet. Replacing the display screen is pretty simple by following the following steps and using iFixit tools.
O que você precisa
-
-
Insert an iFixit opening tool between the body and display of the tablet at the bottom of the device where the charging port is.
-
Slide the tool along the gap you are creating, moving to the right direction against the mini USB port.
-
-
-
-
On the bottom of your tablet, take your J000 screwdriver and take out the three 3mm screws that hold down the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.