Pioneer R1 Battery Replacement - Guia de Reparo iFixit

Introdução

This guide will demonstrate how to access and replace the R1's battery.

O que você precisa

Passo 1 Battery

Pioneer R1 Battery Replacement, Battery: passo 1, imagem 1 %32

Insert your plastic spudger into the opening near the HDMI port.
Gently pry the back cover of the R1 from the the front by using the spudger along the edges.
Do not pull the back cover straight off the R1 as components of the speakers will be attached to both sides.

Passo 2

Pioneer R1 Battery Replacement: passo 2, imagem 1 %32

Lay the R1 flat like an open book.
This will prevent the speakers from becoming disconnected from the motherboard.

Passo 3

Pioneer R1 Battery Replacement: passo 3, imagem 1 %32

Slide a strong thin object, like a thin spudger, between the battery and the display.
Slide the object along the length of the battery to remove it from the display.
The adhesive holding the battery in place is strong and the battery is quite soft. Take care not to break open the battery.
Disengage the battery cables from the motherboard.

Passo 4

Pioneer R1 Battery Replacement: passo 4, imagem 1 %32

Solder the black cable to the nodule labeled BAT+.
Solder the red cable to the nodule labeled BAT-.
Do not allow the solder from one nodule to touch the other, this may cause the battery to explode.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Christopher Rosario

Membro desde: 02/17/15

411 Reputação

Autoria de 4 guias

+6 outros emblemas

Equipe

San Diego State, Team 1-1, Sheppard Winter 2015 Membro de San Diego State, Team 1-1, Sheppard Winter 2015

SDSU-SHEPPARD-W15S1G1

Membros da 3

Autoria de 7 guias

0 comentários

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 771