Introdução

Water damage or a faulty electrical opponent may make the Pioneer Elite Pro-R06U shut off intermittently or fail to power on. Removing the faulty board and installing a new one should get the receiver back up and running.

Peças

Não são necessárias peças.

Remove the two 6.4 mm Phillips screws on each side of the device's casing.
  • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

Adicionar comentário

Remove the three 6.5 mm Phillips screws on the back of the device casing.
  • Remove the three 6.5 mm Phillips screws on the back of the device casing.

Adicionar comentário

Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.
  • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

Adicionar comentário

Gently pull upward and unplug cables D4 and D5.
  • Gently pull upward and unplug cables D4 and D5.

Adicionar comentário

Remove the two 7/16 inch Phillips screws to the left and right of the power supply port.
  • Remove the two 7/16 inch Phillips screws to the left and right of the power supply port.

  • Remove three 5/16 inch Phillips screws from the corners of the board.

Adicionar comentário

Remove the power supply board by pulling it toward the interior of the device then lifting.
  • Remove the power supply board by pulling it toward the interior of the device then lifting.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cody Carter

Member since: 30-01-2018

1.049 reputação

6 Guides authored

Equipe

Baylor, Team S1-G5, Johnson Spring 2018 Membro de Baylor, Team S1-G5, Johnson Spring 2018

BU-JOHNSON-S18S1G5

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 11

Todo: 27