Introdução

Water damage or a faulty electrical component on the optical drive may prevent the Pioneer Elite Pro-R06U from properly displaying an image on the television. Replacement may be necessary to get the receiver back in working order.

Peças

Não são necessárias peças.

Remove the two 6.4 mm Phillips screws on each side of the device's casing.
  • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

Adicionar comentário

Remove the two 6.5 mm Phillips screws on the back of the device casing.
  • Remove the two 6.5 mm Phillips screws on the back of the device casing.

Adicionar comentário

Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.
  • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

Adicionar comentário

Remove the optical drive cooling fan by gripping the ribbon connector at M11 and gently remove by pulling away from the slot.
  • Remove the optical drive cooling fan by gripping the ribbon connector at M11 and gently remove by pulling away from the slot.

Adicionar comentário

Flip the latch on the ribbon connector upward to allow for cable removal.
  • Flip the latch on the ribbon connector upward to allow for cable removal.

  • Grip the ribbon cable and remove by gently pulling away from the unlatched connector.

Adicionar comentário

Remove the two 6.4 mm Phillips mounting screws on the optical drive cooling fan.
  • Remove the two 6.4 mm Phillips mounting screws on the optical drive cooling fan.

Adicionar comentário

Grip the frame of the cooling fan and slide it toward the front panel, then lift out of the device.
  • Grip the frame of the cooling fan and slide it toward the front panel, then lift out of the device.

Adicionar comentário

Unplug ribbon cables D4 and D5. To unplug D4, flip the gate up and pull the ribbon away.
  • Unplug ribbon cables D4 and D5. To unplug D4, flip the gate up and pull the ribbon away.

Adicionar comentário

Remove four 1/4th inch Phillips screws  on the back of the casing.
  • Remove four 1/4th inch Phillips screws on the back of the casing.

  • Unscrew and remove the nut from the threaded connector.

Adicionar comentário

The optical drive is still connected by a cable on its bottom side, lift the drive upwards only slightly when first removing from the casing.
  • The optical drive is still connected by a cable on its bottom side, lift the drive upwards only slightly when first removing from the casing.

  • Pull the optical drive toward the interior of the device and then lift upwards, then pull to remove the cord on the bottom left corner before removing the drive completely.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cody Carter

Member since: 30-01-2018

1.049 reputação

6 Guides authored

Equipe

Baylor, Team S1-G5, Johnson Spring 2018 Membro de Baylor, Team S1-G5, Johnson Spring 2018

BU-JOHNSON-S18S1G5

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 23