Introdução

A faulty or defective front control panel may cause buttons on the media receiver to be unresponsive. Replacing the circuit board should resolve issues with the front controls and buttons.

Peças

Não são necessárias peças.

Remove the two 6.4 mm Phillips screws on each side of the device's casing.
  • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

Adicionar comentário

Remove the two 6.5 mm Phillips screws on the back of the device casing.
  • Remove the two 6.5 mm Phillips screws on the back of the device casing.

Adicionar comentário

Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.
  • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

Adicionar comentário

Unlatch the three plastic connectors on the top of the receiver that hold the front panel to the device casing.
  • Unlatch the three plastic connectors on the top of the receiver that hold the front panel to the device casing.

Adicionar comentário

The connectors on the bottom of the device may be very stiff and could require the use of a plastic prying tool.
  • The connectors on the bottom of the device may be very stiff and could require the use of a plastic prying tool.

  • Carefully flip the device over and unlatch the three plastic connectors that hold the front panel to the bottom of the device casing.

Adicionar comentário

Grip and unplug the ribbon connector that connects the front circuit board to the device.
  • Grip and unplug the ribbon connector that connects the front circuit board to the device.

Adicionar comentário

Unscrew the three 1/4 Phillips head screws on the back of the front circuit board.
  • Unscrew the three 1/4 Phillips head screws on the back of the front circuit board.

Adicionar comentário

Grip the circuit board and slide towards the front side of the plastic casing. Lift upwards to remove the circuit board from the front panel.
  • Grip the circuit board and slide towards the front side of the plastic casing.

  • Lift upwards to remove the circuit board from the front panel.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cody Carter

Member since: 30-01-2018

1.049 reputação

6 Guides authored

Equipe

Baylor, Team S1-G5, Johnson Spring 2018 Membro de Baylor, Team S1-G5, Johnson Spring 2018

BU-JOHNSON-S18S1G5

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 7

Todo: 43