Ir para o conteúdo principal

O que você precisa

  1. Philips Sonicare FlexCare Spring Replacement, Spring: passo 1, imagem 1 %32
    • Pull the brush head away from the handle to remove it.

  2. Philips Sonicare FlexCare Spring Replacement: passo 2, imagem 1 %32 Philips Sonicare FlexCare Spring Replacement: passo 2, imagem 2 %32
    • Push the flat edge of a nylon or metal spudger between the seal and the toothbrush body and pry it up. Do this on each side until the seal is partially sticking out on all sides.

  3. Philips Sonicare FlexCare Spring Replacement: passo 3, imagem 1 %32
    • Apply pressure to the shaft by pressing it against a firm and flat surface. Continue to apply pressure until the interior electronics are exposed.

  4. Philips Sonicare FlexCare Spring Replacement: passo 4, imagem 1 %32
    • Grab the circular, plastic base with the o-ring and pull it outward.

  5. Philips Sonicare FlexCare Spring Replacement: passo 5, imagem 1 %32
    • Pull off the black rubber ring with a metal or nylon spudger until it clears the metal piece that holds it in place. Pull the ring out.

  6. Philips Sonicare FlexCare Spring Replacement: passo 6, imagem 1 %32
    • Remove the spring from the rubber ring and replace it with the new spring.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Joanna Moraza

Membro desde: 14/04/2015

1.458 Reputação

2 Guias de autoria

Equipe

Cal Poly, Team 4-6, Maness Spring 2015 Membro de Cal Poly, Team 4-6, Maness Spring 2015

CPSU-MANESS-S15S4G6

4 Membros

23 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 28

Últimos 30 dias: 100

Duração total: 3,941