Conserte seus objetos Comunidade Loja

Philips Sonicare DiamondClean Metal Brush Connector Replacement

O que você precisa

  1. Philips Sonicare DiamondClean Metal Brush Connector Replacement, Case Replacement: passo 1, imagem 1 %32 Philips Sonicare DiamondClean Metal Brush Connector Replacement, Case Replacement: passo 1, imagem 2 %32

    • Pull the head from toothbrush.

    Editar

  2. Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 2, imagem 1 %32 Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 2, imagem 2 %32

    • Use a nylon spudger to pry the chrome cap at the bottom off.

    Editar

  3. Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 3, imagem 1 %32

    • Use a nylon spudger to release the black tabs on either side of internals.

    Editar

  5. Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 4, imagem 1 %32 Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 4, imagem 2 %32

    • Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out.

    Editar

  6. Philips Sonicare DiamondClean Metal Brush Connector Replacement, Metal Brush Connector Replacement: passo 5, imagem 1 %32

    • Use a Phillips screwdriver to remove the screw at the base of the metal head.

    Editar

  7. Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 6, imagem 1 %32

    • Use fine tip tweezers to push the white plastic tabs in to release the head from the innards.

    Editar

  8. Philips Sonicare DiamondClean Metal Brush Connector Replacement: passo 7, imagem 1 %32

    • Gently pull the metal head from the innards.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

9 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

Zachary Bertrand

Membro desde: 11/20/17

821 Reputação

Autoria de 3 guias

Emblemas: 14

+11 outros emblemas

Equipe

IUPUI, Team S22-G1, Bayer Fall 2017 Membro de IUPUI, Team S22-G1, Bayer Fall 2017

IUPUI-BAYER-F17S22G1

Membros da 4

Autoria de 9 guias

7 comentários

Great guide - but where is a good source for replacement parts?

Christian Zischek - Responder

Ordered replacement part, came within 3 days at ebay. Didn’t have to replace the soft rubber inlet parts, only the connector.

Piece of cake, exchange of battery seems more labourous, but the brush still works for two weeks, so we postpone this job.

Emilio - Responder

Gut beschrieben, aber wo bekomme ich eine neue Antriebsachse?

Beste Grüße - pechi606

Walter P - Responder

Z.B. direkt aus China : ebay

VauWeh -

Great post, thank-you. One question: My toothbrush has a wire loop around the head. The loop is soldered to the circuit board. Do you know what that wire is for? Cheers!

tim belina - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 10

Últimos 7 dias: 82

Últimos 30 dias: 341

Duração total: 16,449