Conserte seus objetos Comunidade Loja

Philips Norelco OneBlade Exterior Casing Replacement

Introdução

Replacing the exterior casing on a Philips Norelco OneBlade requires little time, no tools, and a replacement casing.

O que você precisa

  1. Philips Norelco OneBlade Exterior Casing Replacement, Exterior Casing: passo 1, imagem 1 %32 Philips Norelco OneBlade Exterior Casing Replacement, Exterior Casing: passo 1, imagem 2 %32 Philips Norelco OneBlade Exterior Casing Replacement, Exterior Casing: passo 1, imagem 3 %32

    • Ensure razor is off, and razor blade has been removed.

    Editar

  3. Philips Norelco OneBlade Exterior Casing Replacement: passo 2, imagem 1 %32 Philips Norelco OneBlade Exterior Casing Replacement: passo 2, imagem 2 %32

    • Locate crease in bottom third of razor.

    • Hold razor in both hands, and place thumbs near crease.

    • Slightly bend the razor near crease.

    • Pull top razor apart.

    • Caution, device may turn on upon removal. Turn off razor before continuing.

    Editar

  4. Philips Norelco OneBlade Exterior Casing Replacement: passo 3, imagem 1 %32

    • Power button should face forward in same direction as circuit board. The crease on each casing component should line up.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Please dispose of exterior casing properly. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com

Autor(a)

com 1 outro contribuidor

Joshua Etchberger

Membro desde: 11/07/17

472 Reputação

Autoria de 3 guias

Emblemas: 10

+7 outros emblemas

Equipe

IUPUI, Team S3-G3, Harley Fall 2017 Membro de IUPUI, Team S3-G3, Harley Fall 2017

IUPUI-HARLEY-F17S3G3

Membros da 3

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 11

Últimos 30 dias: 35

Duração total: 2,965