Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

In order to access the internal components of the beardtrimmer, the front and back panels must be removed. This guide will instruct you on the process.

Peças

Nenhum componente especificado.

  1. Remove the comb from the top of the trimmer.
    • Remove the comb from the top of the trimmer.

  2. Place your thumb underneath the blade and push upward to remove it. Place your thumb underneath the blade and push upward to remove it.
    • Place your thumb underneath the blade and push upward to remove it.

  3. Hold trimmer towards you as shown in the diagram. Insert your prying tool/metal spudger into the marked area.
    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora
  5. Apply gentle pressure and begin prying open the back panel. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release.
    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

  6. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the wires attached to the battery off of the power connectors before completely removing the back panel. Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

  7. Hold the trimmer towards you. Place the metal spudger tool in the marked area.
    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

  8. Apply gentle pressure and begin prying the front panel.
    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

  9. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the trimmer apart using your hands once the panel is at least halfway apart.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Darren Chu

Membro desde: 03/09/2015

1.385 Reputação

3 Guias de autoria

Equipe

USF Tampa, Team 15-2, Blackwell Fall 2015 Membro de USF Tampa, Team 15-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G2

4 Membros

6 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 64