Introdução

Follow the procedure outlined in this guide to remove and install a broken audio or power jack.

Pry off the four white feet with the pointed end of the spudger
  • Pry off the four white feet with the pointed end of the spudger

Adicionar comentário

Unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.
  • Unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

Adicionar comentário

Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.
  • Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.

  • The connectors on the panel are fragile and may break.

Adicionar comentário

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Carefully pull up and out the four electrical connectors and the two ribbon connectors connecting the bottom panel and the dock. Electrical Connectors Ribbon Connectors
  • Carefully pull up and out the four electrical connectors and the two ribbon connectors connecting the bottom panel and the dock.

    • Electrical Connectors

    • Ribbon Connectors

  • The cables do not have a lot of slack in them. Be careful not to break the connectors.

  • One wire is soldered onto the bottom panel. Be careful not to break this bond.

Adicionar comentário

Unscrew the two 5 mm Phillips #00 screws attaching white support bracket to the body of the device.
  • Unscrew the two 5 mm Phillips #00 screws attaching white support bracket to the body of the device.

Adicionar comentário

Unscrew the two 5 mm Phillips #00 screws from green Headphone/Power electronics board to detach from white support bracket.
  • Unscrew the two 5 mm Phillips #00 screws from green Headphone/Power electronics board to detach from white support bracket.

Adicionar comentário

Separate the white suport bracket from the headphone/power electronics board.
  • Separate the white suport bracket from the headphone/power electronics board.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Graham Rolph

Member since: 18-04-2013

1 reputação

2 Guides authored

Equipe

Cal Poly, Team 3-48, Amido Spring 2013 Membro de Cal Poly, Team 3-48, Amido Spring 2013

CPSU-AMIDO-S13S3G48

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 8

Todo: 912