Conserte seus objetos Comunidade Loja

Petnet SmartFeeder SF10E Battery Replacement

Introdução

Use this guide to replace the battery for your SmartFeeder to get your device up and running again. This guide is also a prerequisite to access and replace the motherboard and charging assembly.

O que você precisa

  1. Petnet SmartFeeder SF10E Battery Replacement, Battery: passo 1, imagem 1 %32 Petnet SmartFeeder SF10E Battery Replacement, Battery: passo 1, imagem 2 %32 Petnet SmartFeeder SF10E Battery Replacement, Battery: passo 1, imagem 3 %32

    • Eject the SmartBowl by pressing the button located at the front of the SmartFeeder base.

    • Remove the metal tray by using both hands and pulling out the bowl towards you.

    Editar

  2. Petnet SmartFeeder SF10E Battery Replacement: passo 2, imagem 1 %32 Petnet SmartFeeder SF10E Battery Replacement: passo 2, imagem 2 %32

    • Turn the bowl tray side down by using both hands.

    • Remove seven 11 mm screws by using the Phillips #1 screwdriver.

    Editar

  4. Petnet SmartFeeder SF10E Battery Replacement: passo 3, imagem 1 %32 Petnet SmartFeeder SF10E Battery Replacement: passo 3, imagem 2 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar

    • Take the battery out of the SmartBowl with tweezers, avoid pulling on any wires.

    • Hold the SmartBowl down using one hand while using the other hand to remove the battery.

    Editar

  5. Petnet SmartFeeder SF10E Battery Replacement: passo 4, imagem 1 %32 Petnet SmartFeeder SF10E Battery Replacement: passo 4, imagem 2 %32

    • Remove the tape, closest to the four white connectors, with your hands.

    • Keep the wires attached to the tape for easy reassembly.

    Editar

  6. Petnet SmartFeeder SF10E Battery Replacement: passo 5, imagem 1 %32 Petnet SmartFeeder SF10E Battery Replacement: passo 5, imagem 2 %32

    • Trace the wires with your hands from the battery to the motherboard.

    • Detach the three-prong connector between the battery and the motherboard by pulling the white connectors with your hands.

    • Hold on to the sockets on the motherboard or you could accidentally pull off the entire assembly.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Kristin Villanueva

Membro desde: 10/08/18

370 Reputação

Autoria de 2 guias

Emblemas: 7

+4 outros emblemas

Equipe

Cal Poly, Team S13-G7, White Fall 2018 Membro de Cal Poly, Team S13-G7, White Fall 2018

CPSU-WHITE-F18S13G7

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 13

Duração total: 567