Conserte seus objetos Comunidade Loja

Panasonic Lumix DMC-ZS6 Top Assembly Replacement

Introdução

This step by step guide will help you replace a faulty top assembly without damaging any of the other components on the camera.

O que você precisa

  1. Panasonic Lumix DMC-ZS6 Top Assembly Replacement, Top Assembly: passo 1, imagem 1 %32

    • Remove the battery and the SD card.

    Editar

  2. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 2, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 2, imagem 2 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 2, imagem 3 %32

    • Remove the two bottom 1.0 mm screws with a Phillips #000 screwdriver.

    • Remove the two 1.0 mm screws on the left with a Phillips #000 screwdriver.

    • Remove the two 1.0 mm screws on the right with a Phillips #000 screwdriver.

    Editar

  3. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 3, imagem 1 %32

    • Carefully separate the back of the camera from the main body.

    • Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged.

    Editar

  4. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 4, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 4, imagem 2 %32

    • Use the tip of a spudger to flip up the black tabs on the ribbon cables.

    • Pull the ribbon cables gently to unseat them.

    Editar

  6. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 5, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 5, imagem 2 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 5, imagem 3 %32

    • Remove the two 1.0 mm screws on the right with a Phillips #000 screwdriver.

    • Remove the two 1.0 mm screws on the left with a Phillips #000 screwdriver.

    • Remove one 1.0 mm screw from the bottom with a Phillips #000 screwdriver.

    Editar

  7. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 6, imagem 1 %32

    • Carefully separate the front of the camera from the main body.

    Editar

  8. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 7, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 7, imagem 2 %32

    • Use the tip of the spudger to disengage the plastic tab.

    • Carefully lift the selector switch away from the motherboard.

    Editar

  9. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 8, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 8, imagem 2 %32

    • Remove three 1.0 mm screws with a Phillips #000 screwdriver.

    • Use the tip of the spudger to disengage the metal tab. Carefully lift the shield away from the motherboard.

    Editar

  10. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 9, imagem 1 %32

    • Insert the tip of the spudger into the center hole of the tripod mount. Apply force in the direction facing away from the button.

    • Carefully lift the tripod mount out of the camera body.

    Editar

  11. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 10, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 10, imagem 2 %32

    • Use the spudger to flip up the brown tab on the motherboard. Carefully unseat the ribbon cable.

    • Insert the tip of the spudger into the hole on the daughterboard. Apply upward force to remove the daughterboard from the main case.

    Editar

  12. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 11, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 11, imagem 2 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 11, imagem 3 %32

    • Use the spudger to flip up the two tabs on the motherboard. Carefully unseat the ribbon cables.

    • Use the Phillips #000 screwdriver to remove the three silver screws.

    • Carefully lift the lens assembly out of the camera.

    Editar

  13. Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 12, imagem 1 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 12, imagem 2 %32 Panasonic Lumix DMC-ZS6 Top Assembly Replacement: passo 12, imagem 3 %32

    • Use the tip of the spudger to disengage the tab on the back of the camera.

    • Use the tip of the spudger to disengage the two tabs on the front of the camera.

    • Carefully lift the top assembly out of place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 7 outros contribuidores

Derrick Thompson

Membro desde: 01/30/18

1.035 Reputação

Autoria de 5 guias

Emblemas: 4

+1 outro emblema

Equipe

Baylor, Team S2-G5, Johnson Spring 2018 Membro de Baylor, Team S2-G5, Johnson Spring 2018

BU-JOHNSON-S18S2G5

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 260