Pular para o conteúdo principal

Introdução

This guide will teach users how to replace broken or malfunctioning lens assembly.

  1. Remove the battery and the SD Card
    • Remove the battery and the SD Card

  2. Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver
    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver

  3. Carefully separate the back of the camera from the main body
    • Carefully separate the back of the camera from the main body

    • Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged

  4. Use the tip of the 2.0 mm flathead screwdriver to flip up the black tabs on the ribbon cables Pull gently on the ribbon cables to unseat them
    • Use the tip of the 2.0 mm flathead screwdriver to flip up the black tabs on the ribbon cables

    • Pull gently on the ribbon cables to unseat them

  5. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  6. Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver
    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver

    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver

  7. Carefully separate the front of the camera from the main body
    • Carefully separate the front of the camera from the main body

  8. Use the tip of the 1.5 mm flathead screwdriver to disengage the plastic tab Carefully lift the selector switch away from the motherboard
    • Use the tip of the 1.5 mm flathead screwdriver to disengage the plastic tab

    • Carefully lift the selector switch away from the motherboard

  9. Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver Use the tip of the 2.0 mm flathead to disengage the metal tab, then carefully lift the shield away from the motherboard
    • Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver

    • Use the tip of the 2.0 mm flathead to disengage the metal tab, then carefully lift the shield away from the motherboard

  10. Insert the tip of the 2.0 mm flathead into the center hole of the tripod mount, and apply force in the direction facing away from the button
    • Insert the tip of the 2.0 mm flathead into the center hole of the tripod mount, and apply force in the direction facing away from the button

    • Carefully lift the tripod mount out of the camera body

  11. Use the 2.0 mm flathead to flip up the brown tab on the motherboard and carefully unseat the ribbon cable Insert the tip of the 2.0 mm flathead screwdriver into the hole on the daughter board, then apply upward force to remove the daughter board from the main case
    • Use the 2.0 mm flathead to flip up the brown tab on the motherboard and carefully unseat the ribbon cable

    • Insert the tip of the 2.0 mm flathead screwdriver into the hole on the daughter board, then apply upward force to remove the daughter board from the main case

  12. Use the 2.0 mm flathead to flip up the two tabs on the motherboard and carefully unseat the ribbon cables Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver Carefully lift the lens assembly out of the camera
    • Use the 2.0 mm flathead to flip up the two tabs on the motherboard and carefully unseat the ribbon cables

    • Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver

    • Carefully lift the lens assembly out of the camera

Conclusão

To reassemble your device, follow these instructions in reverse order.

Derrick Thompson

Membro desde: 30-01-2018

1.035 reputação

5 Guias de autoria

Equipe

Baylor, Team S2-G5, Johnson Spring 2018 Membro de Baylor, Team S2-G5, Johnson Spring 2018

BU-JOHNSON-S18S2G5

3 Membros

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Todo: 114