Ir para o conteúdo principal

Introdução

This guide will teach you step by step on how to replace broken or malfunctioning Panasonic Lumix DMC-ZS6 LCD screens.

Peças

Nenhum componente especificado.

  1. Remove the battery and SD card.
    • Remove the battery and SD card.

  2. Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver. Unscrew the two 1.0 mm screws to the left  with a Phillips #000 screwdriver. Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver.
    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver.

    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver.

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver.

  3. Separate the back of the camera from the main body carefully.
    • Separate the back of the camera from the main body carefully.

    • Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged.

  4. Use the tip of the spudger to flip up the black tabs on the ribbon cables. Pull gently on the ribbon cables to unseat them.
    • Use the tip of the spudger to flip up the black tabs on the ribbon cables.

    • Pull gently on the ribbon cables to unseat them.

  5. Use the tip of the spudger to flip up the metal tabs.
    • Use the tip of the spudger to flip up the metal tabs.

    • Lift the LCD panel out of place carefully.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Derrick Thompson

Membro desde: 30/01/2018

1.035 Reputação

5 Guias de autoria

Equipe

Baylor, Team S2-G5, Johnson Spring 2018 Membro de Baylor, Team S2-G5, Johnson Spring 2018

BU-JOHNSON-S18S2G5

3 Membros

10 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 114