Pular para o conteúdo principal

Introdução

Use this guide to replace the camera's battery.

Peças

Nenhum componente especificado.

  1. Locate the small, hinged door on the bottom of the camera.
    • Locate the small, hinged door on the bottom of the camera.

  2. Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).
    • Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).

    • The hinged door should swing open after unlocking.

  3. Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.
    • Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.

    • This should release the battery.

  4. Pull the battery out of the camera. The battery should slide out easily.
    • Pull the battery out of the camera.

    • The battery should slide out easily.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Juan Pablo Quinonez Weston

Membro desde: 16-04-2013

4 reputação

4 Guias de autoria

Equipe

Cal Poly, Team 13-60, Johann Spring 2013 Membro de Cal Poly, Team 13-60, Johann Spring 2013

CPSU-JOHANN-S13S13G60

3 Membros

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 887