Ir para o conteúdo principal

Panasonic Lumix DMC-ZS3 Back Cover Replacement

O que você precisa

  1. Panasonic Lumix DMC-ZS3 Back Cover Replacement, Back Cover: passo 1, imagem 1 %32 Panasonic Lumix DMC-ZS3 Back Cover Replacement, Back Cover: passo 1, imagem 2 %32 Panasonic Lumix DMC-ZS3 Back Cover Replacement, Back Cover: passo 1, imagem 3 %32
    • Remove the following eleven screws securing the covers to the ZS3

    • Eleven 3 mm Phillips screws

    • Using too much pressure when removing the screws may strip the screws and complicate screw removal at a later time.

  2. Panasonic Lumix DMC-ZS3 Back Cover Replacement: passo 2, imagem 1 %32 Panasonic Lumix DMC-ZS3 Back Cover Replacement: passo 2, imagem 2 %32
    • Use the flat end of a spudger to pry apart the back cover from the rest of the unit as shown.

    • Be sure to carefully and slowly lift the back cover. Forcefully lifting the back cover and fully separating it at this point may ruin internal connections.

  3. Panasonic Lumix DMC-ZS3 Back Cover Replacement: passo 3, imagem 1 %32 Panasonic Lumix DMC-ZS3 Back Cover Replacement: passo 3, imagem 2 %32
    • Using your fingernail or a spudger, flip up the ZIF locking flap on the two LCD ribbon cable sockets that connect the back cover to the rest of the unit.

    • Be sure you are opening the locking tab, not pulling against the socket mounted to the board.

  4. Panasonic Lumix DMC-ZS3 Back Cover Replacement: passo 4, imagem 1 %32
    • Remove the two LCD board ribbon cables out of their sockets.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Equipe

Cal Poly, Team 13-60, Johann Spring 2013 Membro de Cal Poly, Team 13-60, Johann Spring 2013

CPSU-JOHANN-S13S13G60

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 762